Tech Diary

This post describes the control panel developed with a few open source software and libraries. The main purpose is to have a proof of concept that the various components can be put together to become a useful product. I have built a smart home system controlled using Openhab and the hardware switches are primarily using Sonoff switches with Tasmota firmware. The switches are controlled using Openhab Habpanel using an Android Tablet. Generally, this is my preferred way of  using the Android Tablet but the Arduino control panel is developed so that it can interface to external hardware at low cost. The control panel is developed using ESP-Link firmware with the El-client APIs and the hardware is an ESP8266 and Mega2560 combi board.  Besides acting as a touchscreen based on/off switch, it is also an internet clock (ntp) and a doorbell buzzer. The software/firmware/libraries are ESP-Link el-client APIs (interface to ESP-Link firmware MCUFriends Arduino library...

I have found this interesting board selling on Aliexpress website. It is an Arduino Mega 2650 with a built-in ESP8266 which allows the Mega to connect to wifi. This board has cut down a lot of wiring and bring out interesting possibilities. One of this is to connect up both the microcontrollers using ESP-link firmware. I have an earlier blog post  that described how to wire up an ESP-01 and Arduino Pro Mini. One of the tricky parts in this setup is the sequence of flashing the ESP firmware. Flashing the onboard ESP8266 requires some setting changes to the dip switches. The following are the sequences which I get both the microcontrollers to talk to each other. Set the jumper 5,6,7 to ON and the rest OFF. This will set the ESP to update mode. I am using version 3.0.14  and flashed the ESP using the following parameters: esptool --port com26 --baud 230400 write_flash -fm dio -fs 4MB -ff 80m 0x0 boot_v1.6.bin 0x1000 user1.bin 0x3fc000 esp_init_data_defa...